Product introduction
 specialty bio-based polyol | ||||
| various kinds | product model | hydroxyl valuemgKOH/g | Pronunciation25℃, mPa · s | application scenario |
| Cashew shell oil-based polyol | Naxipol-C N4149 | 165～175 | 1500～1800 | Two-component polyurethane with chemical resistance and thermal stability |
| Cashew shell oil-based polyol | Naxipol-C N4131 | 245～255 | 1000～1300 | Two-component polyurethane with chemical resistance and thermal stability |
| Water-dispersible polyol | Naxipol-W D5110 | 110～120 | fluidity of liquids | Branch-chain hydrophilic, used in the synthesis of waterborne polyurethane. |
| Water-dispersible polyol | Naxipol-W D5120 | 50～60 | thick liquid | Branch-chain hydrophilic, used in the synthesis of waterborne polyurethane. |
| Water-dispersible polyol | Naxipol-W D5220 | 50～60 | crystalline solid | Branch-chain hydrophilic, used in the synthesis of waterborne polyurethane. |
| bio-based cyclic recycled polyol | Naxipol-RC 6007 | 135～145 | 150～350 | Used with RC7012 for adhesives and coatings for hard and tough materials. |
| bio-based cyclic recycled polyol | Naxipol-RC 6026 | 135～145 | 150～350 | Used with RC7012 for adhesives and coatings for hard and tough materials. |
| Modified specialty polyol | Naxipol-RC 7012 | 480～520 | 2500～3500 | Low cost, heat resistant, and high toughness |
| Modified specialty polyol | Naxipol-RC 7040 | 720～820 | 200～500 | High polymerization degree, enhance cross-linking, reduce viscosity |
| Modified specialty polyol | Naxipol-D A7150 | 165～175 | 38000～42000 | Dimer acid polyol, hydrophobicity, and adhesion |
| Non-isocyanate polyurethane polyol | Naxipol-C O8300 | 290～310 | transparent solid | PUR hot melt adhesive enhances initial adhesion, solvent-free polyurethane toughening |
| Non-isocyanate polyurethane polyol | Naxipol-C O8400 | 400-440 | white solid | PUR hot melt adhesive enhances initial adhesion, solvent-free polyurethane toughening |